Functional Bed КФС - 3ВЭГ Beds are delivered on wheels, the first figure is the number of mobile units, and letters are the type of drive: Г - comb, В - Screw, Э - electric lift (marked from the head section) Functional Bed КФС - 3ВЭГ is for to create necessary conditions for the medical and prophylactic activities, and for the convenience of service staff during the patient care. Functional Bed with three mobile units, and it’s possible to change the height of the bed, using electric drive. Sections of the bed are made of square tubes of 25x25 and welded wire grid with a diameter of 5 mm., the size of a cell is 100x50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed can be lifted with the screw mechanism, which is made of steel and bronze, and is protected from overload (Antivandal screw). The intermediate part is activated by electric drive «ILCON» with a remote control panel. Electric drive works from the network of alternating current at a frequency of 50 Hz with a nominal voltage of 220 V and is for short-term deviations of the supply voltage + 10% of the nominal value. The coxal section of the bed is fixed and firmly hitched to the power frame. Leg section is driven by the comb. All metal parts of the bed are painted with white polymeric- powder paint. The bed has four corner bumpers and equippedв with electric drive by company «ILCON» in order to lift the back section. Additional set: rack for a dropper, side fences, support under a bad-pan, Balkan frame, mattress for a functional three sectional bed | 
